How To Get Into Programming Mode

1. Turn your transmitter on.

2. Plug the battery into the ESC with its switch off. If your ESC does not have a switch, hold full throttle on your transmitter before plugging in the battery.

3. Hold full throttle on your transmitter and turn the ESC switch on.

4. The ESC will go through its boot-up sequence and blink the green LED. If the ESC’s voltage cutoff is set to Auto-LiPo (the default setting), then the ESC will emit a sequence of beeps indicating the Inflatable Water Park number of battery cells. If the number of beeps does NOT match the number of cells, disconnect the battery and confirm that it is fully charged.

5. There will be a sequence of four “rings” and the red LED will blink.

6. Keep holding the trigger, within 6 – 8 seconds there will be a sequence of four “rings” and the yellow LED will blink. You are now in programming mode; let the trigger return to neutral.